Flange open ball bearings – metric
High precision ball bearings in grades up to ABEC 9 with bores from 1 to 30mm and comparable inch dimensions
General Information
Menu
DEEP GROOVE FLANGE EXTENDED INNER RING BALL BEARINGS
Inch Series
Bore Ø (d) | Outer Ø (D) | Flange Ø (FD) | Open Width (B) | Open Flange Width (FB) | Radius (rs – min) (2) | Flange Open Part No | Load Rating Cr(N) | Load Rating Cor(N) | Limiting Speed (6) Nur (x 1000 rpm) | Ball Complement Qty.: Z (5) | Ball Complement Size: Dw |
| 1.5 | 4 | 5 | 1.2 | 0.4 | 0.05 | F68/1.5 | 163 | 44 | 113 | 6 | 0.794 |
| 1.5 | 5 | 6.5 | 2 | 0.6 | 0.15 | F69/1.5 | 192 | 59 | 93 | 7 | 0.794 |
| 2 | 5 | 6.1 | 1.5 | 0.5 | 0.08 | F682 | 192 | 59 | 90 | 7 | 0.794 |
| 2 | 6 | 7.5 | 2.3 | 0.6 | 0.15 | F692 | 286 | 90 | 91 | 7 | 1 |
| 2.5 | 6 | 7.1 | 1.8 | 0.5 | 0.08 | F68/2.5 | 289 | 92 | 81 | 7 | 1 |
| 2.5 | 7 | 8.5 | 2.5 | 0.7 | 0.15 | F69/2.5 | 432 | 149 | 71 | 8 | 1.191 |
| 3 | 6 | 7.2 | 2 | 0.6 | 0.08 | F673 | 195 | 60 | 81 | 8 | 1 |
| 3 | 7 | 8.1 | 2 | 0.5 | 0.1 | F683 | 432 | 149 | 71 | 8 | 1.191 |
| 3 | 8 | 9.5 | 3 | 0.7 | 0.15 | F693 | 644 | 215 | 67 | 7 | 1.588 |
| 3 | 10 | 11.5 | 4 | 1 | 0.15 | F623 | 725 | 265 | 62 | 8 | 1.588 |
| 4 | 7 | 8.2 | 2 | 0.6 | 0.08 | F674 | 345 | 130 | 63 | 9 | 1 |
| 4 | 9 | 10.3 | 3.3 | 0.6 | 0.1 | F684 | 658 | 226 | 62 | 7 | 1.588 |
| 4 | 11 | 12.5 | 4 | 1 | 0.15 | F694 | 730 | 271 | 66 | 8 | 1.588 |
| 4 | 12 | 13.5 | 4 | 1 | 0.15 | F604 | 734 | 282 | 56 | 8 | 1.588 |
| 4 | 13 | 15 | 5 | 1 | 0.2 | F624 | 1.339 | 488 | 52 | 7 | 2.381 |
| 4 | 16 | 18 | 5 | 1 | 0.3 | F634 | 1.646 | 663 | 39 | 8 | 2.5 |
| 5 | 8 | 9.2 | 2 | 0.6 | 0.08 | F675 | 390 | 160 | 52 | 11 | 1 |
| 5 | 11 | 12.5 | 3 | 0.8 | 0.15 | F685 | 734 | 282 | 52 | 8 | 1.588 |
| 5 | 13 | 15 | 4 | 1 | 0.2 | F695 | 851 | 366 | 49 | 10 | 1.588 |
| 5 | 14 | 16 | 5 | 1 | 0.2 | F605 | 1.096 | 437 | 50 | 8 | 1.984 |
| 5 | 16 | 18 | 5 | 1 | 0.3 | F625 | 1.646 | 663 | 40 | 8 | 2.5 |
| 5 | 19 | 22 | 6 | 1.5 | 0.3 | F635 | 2.522 | 1.057 | 33 | 8 | 3.175 |
| 6 | 13 | 15 | 3.5 | 1 | 0.15 | F686 | 1.096 | 437 | 44 | 8 | 1.984 |
| 6 | 15 | 17 | 5 | 1.2 | 0.2 | F696 | 1.186 | 505 | 46 | 9 | 1.984 |
| 6 | 19 | 22 | 6 | 1.5 | 0.3 | F626 | 2.522 | 1.057 | 34 | 8 | 3.175 |
| 7 | 14 | 16 | 3.5 | 1 | 0.15 | F687 | 1.186 | 505 | 41 | 9 | 1.984 |
| 7 | 17 | 19 | 5 | 1.2 | 0.3 | F697 | 1.795 | 776 | 39 | 9 | 2.5 |
| 7 | 19 | 22 | 6 | 1.5 | 0.3 | F607 | 2.522 | 1.057 | 38 | 8 | 3.175 |
| 7 | 22 | 25 | 7 | 1.5 | 0.3 | F627 | 3.369 | 1.363 | 35 | 7 | 3.969 |
| 8 | 16 | 18 | 4 | 1 | 0.2 | F688 | 1.795 | 776 | 38 | 9 | 2.5 |
| 8 | 19 | 22 | 6 | 1.5 | 0.3 | F698 | 1.798 | 797 | 40 | 9 | 2.5 |
| 8 | 22 | 25 | 7 | 1.5 | 0.3 | F608 | 3.369 | 1.363 | 38 | 7 | 3.969 |
| 9 | 17 | 19 | 4 | 1 | 0.2 | F689 | 1.798 | 797 | 34 | 9 | 2.5 |
| 10 | 19 | 21 | 5 | 1 | 0.3 | F6800 | 1.922 | 915 | 34 | 10 | 2.5 |
- Ball bearings without closure may be supplied with recesses. Please advise if you require bearings without recesses.
- rs min = minimum single bearing chamfer or maximum shaft or housing fillet radius.
- Not applicable to bearings with extended inner ring.
- Not applicable to flanged bearings.
- The number of balls may vary due to different types of retainer.
- See ‘Limiting Speeds’.
- Tolerance of bore +12µm to +3µm.
- Available in different width with closure.
