ABIS TTS Seal Ball Bearings Metrics
With bores of 0.6 to 90mm and precision grades to ABEC 7
General Information
Metric Series
ABIS TTS SEAL ball bearings
Bore Ø (d) | Outer Ø (D) | Flange Ø (Df) | Radius (rs – min) | TTS Seal Part No | Flange TTS Seal Part No | Shield Width (B1) | Shield Flange Width (Bf1) | Load Rating Cr(N) | Load Rating Cor(N) | Max Speed Grease (x1000 rpm) | Max Speed Oil (x1000 rpm) | Cage Type |
2 | 6 | 7.5 | 0.15 | 692TTS | F692TTS | 3 | 0.8 | 330 | 99 | 75 | 90 | W/J/TW |
2 | 7 | 8.2 | 0.15 | MR72TTS | MF72TTS | 3 | 0.6 | 386 | 129 | 63 | 75 | W |
2 | 7 | 8.5 | 0.15 | 602TTS | F602TTS | 3.5 | 0.9 | 386 | 129 | 60 | 71 | W |
2.5 | 7 | 8.5 | 0.15 | 692TTS | F692TTS | 3.5 | 0.9 | 386 | 129 | 63 | 75 | W |
3 | 7 | 8.1 | 0.1 | 683TTS | F683TTS | 3 | 0.8 | 311 | 112 | 63 | 75 | W |
4 | 9 | 10.3 | 0.1 | 684TTS | F684TTS | 4 | 1 | 641 | 227 | 53 | 63 | W/J/TW |
4 | 16 | 18 | 0.3 | 634TTS | F634TTS | 5 | 1 | 1340 | 523 | 36 | 43 | J |
5 | 8 | 9.2 | 0.1 | MF85TTS | MR85TTS | 2.5 | 0.6 | 218 | 90 | 53 | 63 | W |
5 | 9 | 10.2 | 0.15 | MR95TTZ | MF95TTS | 3 | 0.6 | 431 | 169 | 50 | 60 | W |
5 | 13 | 15 | 0.2 | 695TTS(4) | F695TTS(4) | 4 | 1 | 1077 | 432 | 43 | 50 | J |
5 | 16 | 18 | 0.3 | 625TTS | F625TTS | 5 | 1 | 1729 | 675 | 36 | 43 | J/TW |
6 | 10 | 11.2 | 0.15 | MR106TTS(4) | MF106TTS(4) | Â | Â | Â | Â | Â | Â | Â |
6 | 12 | 13.2* | 0.2 | MR126TTS(4) | MF126TTS(4) | 4 | 0.8 | 716 | 295 | 43 | 50 | W/J/TW |
6 | 13 | 15 | 0.15 | 686TTS | F686TTS | 5 | 1.1 | 1082 | 442 | 40 | 50 | J/TW |
6 | 15 | 17 | 0.2 | 696TTS | F696TTS | 5 | 1.2 | 1340 | 523 | 40 | 45 | J |
6 | 19 | 22 | 0.3 | 626TTS(4) | F626TTS(4) | 6 | 1.5 | 2336 | 896 | 32 | 40 | J/TW |
7 | 11 | 12.2 | 0.15 | MR117TTS | MF117TTS | 3 | 0.6 | 455 | 202 | 43 | 50 | W |
7 | 13 | 14.2* | 0.2 | MF137TTS | MF137TTZ | 4 | 0.8 | 541 | 276 | 40 | 48 | W |
7 | 14 | 16 | 0.15 | 687TTS | F687TTS | 5 | 1.1 | 1173 | 513 | 40 | 50 | J |
7 | 19 | 22 | 0.3 | 607TTS(4) | F607TTS(4) | 6 | 1.5 | 2336 | 896 | 36 | 43 | J/TW |
7 | 22 | 25 | 0.3 | 627TTS | F627TTS | 7 | 1.5 | 3287 | 1379 | 30 | 36 | J/TW |
7 | 26 | Â | 0.3 | 637TTS | Â | 9 | Â | 4563 | 1983 | 28 | 34 | J |
8 | 12 | 13.2* | 0.15 | MR128TTS | MF128TTS | 3.5 | 0.8 | 543 | 274 | 40 | 48 | W |
8 | 16 | 18 | 0.2 | 688TTS | F688TTS | 5 | 1.1 | 1252 | 592 | 36 | 43 | J/TW |
8 | 22 | 25 | 0.3 | 608TTS | F608TTS | 7 | 1.5 | 3293 | 1379 | 34 | 40 | J/TW |
9 | 14 | 15.5 | 0.1 | 679TTS | F679TTS | 4.5 | 0.8 | 919 | 468 | 36 | 42 | J |
Â
Notes
*This dimension is increased by 0.4mm for shielded or seal version
Bearings also available with stainless materials: suffix S or H
Bearing also available with single shield or seal: suffix Z, RS, RU or TS
TTS(4) uses smaller ball, load rating is lower than standard
Value(5) is not based up upon JIS B 1521
