ABIS Bearings Criteria
For Lubricating Oil Selection

With bores of 0.6 to 90mm and precision grades to ABEC 7

ABUS Bearings Criteria for lubricating oil selection

Operating Temperature of Bearing (oC)DNISO Viscosity Grade of Lubricating Oil (VG)
Medium LoadHeavy Load/Sock Load
-30~0Up to permissible rotating speed 15/22/3232/46
0~+60Up to 1500032/46/68100
15000~8000032/4668
80000~15000022/3232
150000~5000001022/32
+60~100Up to 15000150220
15000~800000100150
80000~15000068100/150
150000~5000003268
+100~+150  Up to permissible rotating speed320

Notes

1. If heavy loads occur at low speeds, a high viscosity lubricating oil should be used.
2. This table is for oil bath lubrication system and recirculating oil systems.
3. dn = bearing bore diameter d(mm) x rotating speed n (r.p.m)

We look forward to helping you.

For Customised Solutions

Fill out the form below, and our team will be in touch within 24 hours.