GRW High Precision Ball Bearings
2TS seal flange extended inner ball bearings metric
High precision ball bearings in grades up to ABEC 9 with bores from 1 to 30mm and comparable inch dimensions
General Information
Menu
DEEP GROOVE 2TS SEAL FLANGE EXTENDED INNER RING BALL BEARINGS
Metric Series
| Bore Ø (d) | Outer Ø (D) | Flange Ø (FD) | Open Width (B) | Open Flange Width (FB) | Radius (rs – min) (2) | Flange Ext Inner Ring 2TS Seal Part No | Shield Width (B1) | Load Rating Cr (N) | Load Rating Cor (N) | Limiting Speed (6) Nur (x 1000 rpm) | Ball Comple ment Qty.: Z (5) | Ball Comple ment Size: Dw |
| 2 | 5 | 6.1 | 2.3 | 0.6 | 0.08 | FE6822TS | 3.1 | 192 | 59 | 71 | 7 | 0.794 |
| 2 | 6 | 7.5 | 2.3 | 0.6 | 0.15 | FE6922TS | 3.1 | 286 | 90 | 65 | 7 | 1 |
| 2.5 | 6 | 7.1 | 2.6 | 0.8 | 0.08 | FE68/2.52TS | 3.4 | 289 | 92 | 61 | 7 | 1 |
| 2.5 | 7 | 8.5 | 3.5 | 0.9 | 0.15 | FE69/2.52TS | 4.3 | 432 | 149 | 53 | 8 | 1.191 |
| 3 | 7 | 8.1 | 3 | 0.8 | 0.1 | FE6832TS | 3.8 | 432 | 149 | 53 | 8 | 1.191 |
| 3 | 8 | 9.5 | 4 | 0.9 | 0.15 | FE6932TS | 4.8 | 644 | 215 | 51 | 7 | 1.588 |
| 3 | 10 | 11.5 | 4 | 1 | 0.15 | FE56232TS | 4.8 | 725 | 265 | 44 | 8 | 1.588 |
| 4 | 9 | 10.3 | 4 | 1 | 0.1 | FE6842TS | 4.8 | 658 | 226 | 45 | 7 | 1.588 |
| 4 | 10 | 11.5 | 4 | 1 | 0.1 | FE684/102TS | 4.8 | 658 | 226 | 86 | 7 | 1.588 |
| 4 | 11 | 12.5 | 4 | 1 | 0.15 | FE6942TS | 4.8 | 730 | 271 | 41 | 8 | 1.588 |
| 4 | 12 | 13.5 | 4 | 1 | 0.15 | FE6042TS | 4.8 | 734 | 282 | 37 | 8 | 1.588 |
| 4 | 13 | 15 | 5 | 1 | 0.2 | FE6242TS | 5.8 | 1.339 | 488 | 37 | 7 | 2.381 |
| 4 | 16 | 18 | 5 | 1 | 0.3 | FE6342TS | 5.8 | 1.646 | 663 | 31 | 8 | 2.5 |
| 5 | 11 | 12.5 | 5 | 1 | 0.15 | FE6852TS | 5.8 | 734 | 282 | 37 | 8 | 1.588 |
| 5 | 13 | 15 | 4 | 1 | 0.2 | FE6952TS | 4.8 | 851 | 366 | 34 | 10 | 1.588 |
| 5 | 14 | 16 | 5 | 1 | 0.2 | FE6052TS | 5.8 | 1.096 | 437 | 33 | 8 | 1.984 |
| 5 | 16 | 18 | 5 | 1 | 0.3 | FE6252TS | 5.8 | 1.646 | 663 | 31 | 8 | 2.5 |
| 5 | 19 | 22 | 6 | 1.5 | 0.3 | FE6352TS | 6.8 | 2.522 | 1.057 | 28 | 8 | 3.175 |
| 6 | 13 | 15 | 5 | 1.1 | 0.15 | FE6862TS | 5.8 | 1.096 | 437 | 33 | 8 | 1.984 |
| 6 | 15 | 17 | 5 | 1.2 | 0.2 | FE6962TS | 5.8 | 1.186 | 505 | 31 | 9 | 1.984 |
| 6 | 19 | 22 | 6 | 1.5 | 0.3 | FE6262TS | 6.8 | 2.522 | 1.057 | 28 | 8 | 3.175 |
| 7 | 14 | 16 | 5 | 1.1 | 0.15 | FE6872TS | 5.8 | 1.186 | 505 | 31 | 9 | 1.984 |
| 7 | 17 | 19 | 5 | 1.2 | 0.3 | FE6972TS | 5.8 | 1.795 | 776 | 28 | 9 | 2.5 |
| 7 | 19 | 22 | 6 | 1.5 | 0.3 | FE6072TS | 6.8 | 2.522 | 1.057 | 28 | 8 | 3.175 |
| 7 | 22 | 25 | 7 | 1.5 | 0.3 | FE6272TS | 3.369 | 1.363 | 27 | 7 | 3.969 | |
| 8 | 16 | 18 | 6 | 1.3 | 0.2 | FE6882TS | 6.8 | 1.795 | 776 | 28 | 9 | 2.5 |
| 8 | 19 | 22 | 6 | 1.5 | 0.3 | FE6982TS | 6.8 | 1.798 | 797 | 27 | 9 | 2.5 |
| 8 | 22 | 25 | 7 | 1.5 | 0.3 | FE6082TS | 3.369 | 1.363 | 27 | 7 | 3.969 | |
| 9 | 17 | 19 | 6 | 1.3 | 0.2 | FE6892TS | 6.8 | 1.798 | 797 | 27 | 9 | 2.5 |
| 10 | 19 | 21 | 7 | 1.5 | 0.3 | FE68002TS | 7.8 | 1.922 | 915 | 25 | 10 | 2.5 |
- Ball bearings without closure may be supplied with recesses. Please advise if you require bearings without recesses.
- rs min = minimum single bearing chamfer or maximum shaft or housing fillet radius.
- Not applicable to bearings with extended inner ring.
- Not applicable to flanged bearings.
- The number of balls may vary due to different types of retainer.
- See ‘Limiting Speeds’.
- Tolerance of bore +12µm to +3µm.
- Available in different width with closure.
